SmartTap
Bio-Link QTST2B Quatreau SmartTap™ Dual-Temperature Drinking Water Tap Commercial & Home Drinking Water Tap
Worktop cut-out
Two-button setup · Made in Britain

Quatreau SmartTap™

Quatreau Hot & Cold Smart Tap

C

H

One press for boiling water, one for chilled — the Quatreau SmartTap™ dual-temperature version lets you choose your two buttons: boiling plus chilled, or chilled plus sparkling. 316 stainless steel body with ten finishes plus custom colours to match any interior; made in Britain.
Bio-Link certification marks

Filtration system tested by SGS

Filtration technology

RO or UF add-on available

Installation type

Worktop cut-out

Applicable venues

Home · Office
FILTRATION ‧ Filtration technology

Optional filtration system (UF ultrafiltration)

Drinking water passes through multiple filter cartridges in turn, removing impurities layer by layer, finishing with activated carbon to improve taste.

PP

Filters large particles such as silt and rust, and pesticides

rust

sediment

Activated Carbon

Filters off-tastes and residual chlorine

chlorine

Hollow fibre membrane (UF)

Filters down to 0.01 micron, effectively reducing viruses and bacteria

virus & bacteria

Activated Carbon

Filters out off-tastes and improves taste

bad ordor

*This model can take either an RO or a UF filtration system; the stages above are for the UF configuration. Filtration performance is for reference only, and actual performance may vary with incoming water quality, system condition and ongoing maintenance.

FEATURES ‧ Product features

Product features

High-Performance Drinking Water Output

  • Boiling, chilled and sparkling water
  • At home in a pantry or behind a bar

Space-Saving and Flexible Installation

  • Fits a standard 610mm cabinet
  • Supports concealed plinth installation

Ultra-Low Energy Consumption and High-Efficiency Insulation

  • Low-energy design with high-efficiency insulation
  • Substantially lowers running cost while holding a stable water temperature

Durable and Sturdy

  • Made from 316 stainless steel
  • Built for high-usage settings

Intelligent and Safe Operation Design

  • Button operation with built-in safety features
  • Meets DDA accessibility standards

Ten finishes to match your scheme

  • Ten finishes, with RAL colours to order
  • Available with or without a drip tray
SPECIFICATIONS ‧ Product specifications

Product Specification

Model type
Drinking Water Tap System
Dimensions (W×D×H)
Tap reach 18.8 cm × height 36.5 cm
Hot Water Output
30 L/hour
Cold water output
20 L/hour
Hot Water Temperature
97-98°C (boiling)
Cold Water Temperature
Below 5°C (chilled)
Dispensing configuration (2 buttons)
Default boiling + chilled; optional chilled + sparkling
Pressure range
3–4 Bar (43–58 psi)
Materials
316 stainless steel
Drip tray
Available with or without a drip tray
Origin
United Kingdom
PEACE OF MIND ‧ Service you can rely on

Supply and maintenance, followed through by one company

No need to wait for a site visit — a free consultation can start right away on WhatsApp, by phone or by sending photos of your site, and we follow through step by step to installation and long-term maintenance.

01

Free Consultation

WhatsApp us, call us or send photos of your site, and we will look at your water usage, your premises and your water needs straight away. An on-site visit can be arranged where needed.

02

Model selection advice

We recommend suitable models based on your site and needs, for purchase or rental, with clear pricing.

03

On-site installation

Our technical team installs and connects the unit on site, ready to use once installed.

04

Regular maintenance

Scheduled on-site maintenance and filter cartridge replacement — supply through to maintenance handled by the same company.

05

Repair support

Reach support by phone or WhatsApp for a quick response.

01 ・ Free Consultation

Reach us on WhatsApp, by phone, or send photos of your site so we can understand your water consumption, venue and water-quality needs; an on-site assessment can be arranged where required.

02 ・ Model Recommendation

We recommend suitable models based on your site and needs, for purchase or rental, with clear pricing.

03 · On-site installation

Our technical team installs and connects the unit on site, ready to use once installed.

04 ・ Scheduled Maintenance

Scheduled on-site maintenance and cartridge replacement; when the replacement month is due, we contact you to arrange it.

05 ・ Repair Support

Contact us on WhatsApp or by phone if there is a problem; we reply within one working day and arrange an on-site visit.

FAQ ‧ Frequently Asked Questions

Frequently asked questions

What are the installation requirements?

Our own technician comes to connect it, usually completing installation the same day so you can start using it; before installation we can look at the site layout and water supply points.

As a general rule, the customer must provide the following:
a. A water supply and power socket beside the dispenser (within 1 metre of the installation point), with a shut-off valve fitted at the end of the outlet pipe
b. A pressure-reducing valve (if water pressure exceeds 30psi)
c. Ventilation where a hot water boiler is installed
d. An outlet / drainage system beside the dispenser (where applicable)

For anything beyond the above, we can carry out additional works and/or supply additional fittings if needed. We will submit a quotation for the customer's approval.

Depending on actual water usage and water quality, we visit on the recommended cycle to replace filter cartridges and check the machine, keeping output steady.

We offer scheduled maintenance plans covering on-site maintenance, filter cartridge replacement, machine checks and fault repairs; RO models also have a renewal plan.

Either works. Rental is an all-inclusive monthly fee (installation, maintenance, cartridge changes, repairs); purchase comes with a standard maintenance plan. The actual plan is quoted according to your site and usage.

The full filtration line has passed SGS testing; designated models meet NSF/ANSI 42 and 58. Bio-Link is also a certified social enterprise (HKCSS/SEE Mark, seemark.hk/see0195), operated by Bio-Link (Holdings) Limited.

We serve Hong Kong and Macau. You are welcome to reach us on WhatsApp or by phone for a free consultation on the right solution for your site.

RELATED ‧ Related models

Same-series dispensers

Drinking Water Tap System
Bio-Link TS0010 Instant-Hot Smart Tap
TS0010

C

R

H

Instant-Heating Smart Tap

Features

Instant-Heating Tap

Filtration System

Optional UF ultrafiltration

Venue

Home · Office
Under-counter water dispenser
TS874 Touch-Control Smart Tap (Iced, Cold & Hot)
TS874

C

R

H

TS874 Touch-Control Smart Tap (Iced, Cold & Hot)

Features

Under-counter, touch-control

Filtration System

Optional UF ultrafiltration

Venue

Home · Office
Drinking Water Tap System
Bio-Link BnOT3 Borg & Overström T3 Cold & Hot Drinking Water Tap | Commercial & Home Drinking Water Tap
BnOT3

C

R

H

Borg & Overström T3

Features

Adjustable 5–92°C

Filtration System

RO or UF add-on available

Venue

Home · Office
Drinking Water Tap System
Bio-Link BnOT3MF B&O T3MonoFit™ Four-Way Drinking Water Tap | Commercial & Home Drinking Water Tap
BnOT3MF

C

R

H

B&O T3MonoFit™

Features

Four-way dispensing with sparkling

Filtration System

RO or UF add-on available

Venue

Home · Office
Bio-Link certification marks
SGS-tested across the full range
Bio-Link certification marks
NSF/ANSI 42 & 58

ST1523 · ST9102 · ST2011

Bio-Link certification marks
SEE Certified Social Enterprise
seemark.hk/see0195

1997

since 1997

Not sure whether the Quatreau SmartTap™ suits you?

Free consultation, with the right solution identified straight away — start on WhatsApp, by phone or by sending photos of your site; an on-site visit can be arranged where needed.