01
Bio-Link BFSW01 Sensor Bottle-Filling Station (Slimline) Public Water Dispenser
Wall-mounted
Sensor bottle filling · Wall-mounted · Ambient

BFSW01

Wall-mount Sensor Bottle Filling Station

R

It fits even a narrow corridor — the BFSW01 body is only 12 cm deep, wall-mounted so it stays clear of the walkway, with contact-free sensor dispensing. It supplies 30 litres of ambient water per hour with UV disinfection; an independent filtration system can be added for direct drinking.
Bio-Link certification marks

Filtration system tested by SGS

Rental (monthly fee)

HK$350

+

36-month zero machine cost plan・the dispenser becomes the customer's at the end of the term

If you would rather buy, you are welcome to request a quotation

Filtration technology

Optional standalone filtration system

Installation type

Wall-mounted

Applicable venues

School・Public Space
FILTRATION ‧ Filtration technology

Optional filtration system (UF ultrafiltration)

Drinking water passes through multiple filter cartridges in turn, removing impurities layer by layer, finishing with activated carbon to improve taste.

UV sterilisation
PP

Filters large particles such as silt and rust, and pesticides

rust

sediment

Activated Carbon

Filters off-tastes and residual chlorine

chlorine

Hollow fibre membrane (UF)

Filters down to 0.01 micron, effectively reducing viruses and bacteria

virus & bacteria

Activated Carbon

Filters out off-tastes and improves taste

bad ordor

*This model can take either an RO or a UF filtration system; the stages above are for the UF configuration. Filtration performance is for reference only, and actual performance may vary with incoming water quality, system condition and ongoing maintenance.

FEATURES ‧ Product features

Product features

Sensor Dispensing

  • Sensor dispensing, no contact
  • Cleaner, more hygienic and more convenient

Compact body

  • Slim wall-mounted design keeps walkways clear
  • 30 litres of ambient water per hour

Cumulative Reduction in Plastic Bottle Usage

  • Automatically displays the plastic bottles saved
  • Supports environmental sustainability

Clean and Hygienic Drinking Water

  • Equipped with an independent water filtration system
  • UV lamp disinfection and sterilization system
SPECIFICATIONS ‧ Product specifications

Product Specification

Model type
Bottle Filling Station
Dimensions (W×D×H)
37 x 12 x 51 cm
Ambient water output
30 L/hour
Water Output
Ambient Water
UV disinfection
Yes
PEACE OF MIND ‧ Service you can rely on

Supply and maintenance, followed through by one company

No need to wait for a site visit — a free consultation can start right away on WhatsApp, by phone or by sending photos of your site, and we follow through step by step to installation and long-term maintenance.

01

Free Consultation

WhatsApp us, call us or send photos of your site, and we will look at your water usage, your premises and your water needs straight away. An on-site visit can be arranged where needed.

02

Model selection advice

We recommend suitable models based on your site and needs, for purchase or rental, with clear pricing.

03

On-site installation

Our technical team installs and connects the unit on site, ready to use once installed.

04

Regular maintenance

Scheduled on-site maintenance and filter cartridge replacement — supply through to maintenance handled by the same company.

05

Repair support

Reach support by phone or WhatsApp for a quick response.

01 ・ Free Consultation

Reach us on WhatsApp, by phone, or send photos of your site so we can understand your water consumption, venue and water-quality needs; an on-site assessment can be arranged where required.

02 ・ Model Recommendation

We recommend suitable models based on your site and needs, for purchase or rental, with clear pricing.

03 · On-site installation

Our technical team installs and connects the unit on site, ready to use once installed.

04 ・ Scheduled Maintenance

Scheduled on-site maintenance and cartridge replacement; when the replacement month is due, we contact you to arrange it.

05 ・ Repair Support

Contact us on WhatsApp or by phone if there is a problem; we reply within one working day and arrange an on-site visit.

FAQ ‧ Frequently Asked Questions

Frequently asked questions

What are the installation requirements?

Our own technician comes to connect it, usually completing installation the same day so you can start using it; before installation we can look at the site layout and water supply points.

As a general rule, the customer must provide the following:
a. A water supply and power socket beside the dispenser (within 1 metre of the installation point), with a shut-off valve fitted at the end of the outlet pipe
b. A pressure-reducing valve (if water pressure exceeds 30psi)
c. Ventilation where a hot water boiler is installed
d. An outlet / drainage system beside the dispenser (where applicable)

For anything beyond the above, we can carry out additional works and/or supply additional fittings if needed. We will submit a quotation for the customer's approval.

Depending on actual water usage and water quality, we visit on the recommended cycle to replace filter cartridges and check the machine, keeping output steady.

We offer scheduled maintenance plans covering on-site maintenance, filter cartridge replacement, machine checks and fault repairs; RO models also have a renewal plan.

Either works. Rental is an all-inclusive monthly fee (installation, maintenance, cartridge changes, repairs); purchase comes with a standard maintenance plan. The actual plan is quoted according to your site and usage.

The full filtration line has passed SGS testing; designated models meet NSF/ANSI 42 and 58. Bio-Link is also a certified social enterprise (HKCSS/SEE Mark, seemark.hk/see0195), operated by Bio-Link (Holdings) Limited.

We serve Hong Kong and Macau. You are welcome to reach us on WhatsApp or by phone for a free consultation on the right solution for your site.

PLANS ‧ Plans

All-inclusive monthly fee, costs stated up front

Bio-Link BFSW01 Sensor Bottle-Filling Station (Slimline) Public Water Dispenser
BFSW01

R

Rental (monthly fee)

HK$350

+

For purchases, feel free to contact us for a quote.

Installation and maintenance
36-month zero machine cost plan・the dispenser becomes the customer's at the end of the term
Deposit $3,000 (refundable)
RELATED ‧ Related models

Same-series dispensers

Bottle-Filling Stations & Drinking Fountains
SBD3200 Puder Freestanding Ice & Hot Water Dispenser (BD3200, Taiwan Premium) — Bio-Link
SBD3200

C

H

Buder Freestanding Chilled & Hot Water Dispenser

Features

Ultra-compact

Filtration System

RO or UF add-on available

Venue

School・Public Space
Bottle-Filling Stations & Drinking Fountains
Bio-Link BFS01 Touch-Free Bottle-Filling Station Public Water Dispenser
BFS01

C

R

Touchless Bottle Filling Station

Features

Touchless operation

Filtration System

RO or UF add-on available

Venue

School・Public Space
Bottle-Filling Stations & Drinking Fountains
Bio-Link BFS02 Sensor Bottle-Filling Station Public Water Dispenser
BFS02

C

R

Filtered Bottle Filling Stations

Features

Plastic bottle counter

Filtration System

RO or UF add-on available

Venue

School・Public Space
Bottle-Filling Stations & Drinking Fountains
BFS05 Freestanding Bottle-Filling Station — Bio-Link
BFS05

R

Freestanding Bottle-Filling Station

Features

No power required

Filtration System

UF Ultrafiltration

Venue

School・Public Space
Bio-Link certification marks
SGS-tested across the full range
Bio-Link certification marks
NSF/ANSI 42 & 58

ST1523 · ST9102 · ST2011

Bio-Link certification marks
SEE Certified Social Enterprise
seemark.hk/see0195

1997

since 1997

Not sure whether the BFSW01 suits you?

Free consultation, with the right solution identified straight away — start on WhatsApp, by phone or by sending photos of your site; an on-site visit can be arranged where needed.