01
Bio-Link SWF01 Three-Temperature Drinking Fountain School Outdoor Water Dispenser
Freestanding
Three-temperature freestanding · UF-ready · Simple

SWF01

Freestanding 3-Temp Drinking Fountain

C

R

H

A drinking point in a playground or public space has to work for everyone — the SWF01's drinking fountain design pairs chilled and hot gooseneck outlets, so it suits drinking straight from the fountain and filling a bottle alike. Chilled, ambient and hot water, RO or ultrafiltration available; 20 litres of hot water per hour and a 304 stainless steel tank.
Bio-Link certification marks

Filtration system tested by SGS

Rental (monthly fee)

HK$480

If you would rather buy, you are welcome to request a quotation

Filtration technology

RO or UF add-on available

Installation type

Freestanding

Applicable venues

School・Public Space
FILTRATION ‧ Filtration technology

Optional filtration system (UF ultrafiltration)

Drinking water passes through multiple filter cartridges in turn, removing impurities layer by layer, finishing with activated carbon to improve taste.

PP

Filters large particles such as silt and rust, and pesticides

rust

sediment

Activated Carbon

Filters off-tastes and residual chlorine

chlorine

Hollow fibre membrane (UF)

Filters down to 0.01 micron, effectively reducing viruses and bacteria

virus & bacteria

Activated Carbon

Filters out off-tastes and improves taste

bad ordor

*This model can take either an RO or a UF filtration system; the stages above are for the UF configuration. Filtration performance is for reference only, and actual performance may vary with incoming water quality, system condition and ongoing maintenance.

FEATURES ‧ Product features

Product features

Three Temperature Options

  • Dispenses cold, ambient and hot water for direct drinking
  • Suitable for placement in school playgrounds or outdoor use

Multiple Water Dispensing

  • Chilled and hot gooseneck outlets
  • Plus a bubbler spout

Filtration configuration

  • Can be paired with an RO or ultrafiltration (UF) system
  • Chosen to match the site's water quality

Materials and cooling

  • 304 stainless steel water tank
  • Compressor cooling

Installation and maintenance

  • Basic installation included
  • First-year maintenance service

Tank capacity and dispensing speed

  • 5.5L hot water tank, 3.5L cold water tank
  • 20L hot water per hour, 10L cold
SPECIFICATIONS ‧ Product specifications

Product Specification

Model type
Floor Standing Water Dispenser
Dimensions (W×D×H)
41 x 30 x 124 cm
Hot water tank
5.5L
Cold water tank
3.5L
Hot Water Output
20 L/hour
Cold water output
10 L/hour
Hot Water Temperature
94-96°C
Cold Water Temperature
3-11°C
Water Output
Cold, ambient and hot water
Power
1000W
PEACE OF MIND ‧ Service you can rely on

Supply and maintenance, followed through by one company

No need to wait for a site visit — a free consultation can start right away on WhatsApp, by phone or by sending photos of your site, and we follow through step by step to installation and long-term maintenance.

01

Free Consultation

WhatsApp us, call us or send photos of your site, and we will look at your water usage, your premises and your water needs straight away. An on-site visit can be arranged where needed.

02

Model selection advice

We recommend suitable models based on your site and needs, for purchase or rental, with clear pricing.

03

On-site installation

Our technical team installs and connects the unit on site, ready to use once installed.

04

Regular maintenance

Scheduled on-site maintenance and filter cartridge replacement — supply through to maintenance handled by the same company.

05

Repair support

Reach support by phone or WhatsApp for a quick response.

01 ・ Free Consultation

Reach us on WhatsApp, by phone, or send photos of your site so we can understand your water consumption, venue and water-quality needs; an on-site assessment can be arranged where required.

02 ・ Model Recommendation

We recommend suitable models based on your site and needs, for purchase or rental, with clear pricing.

03 · On-site installation

Our technical team installs and connects the unit on site, ready to use once installed.

04 ・ Scheduled Maintenance

Scheduled on-site maintenance and cartridge replacement; when the replacement month is due, we contact you to arrange it.

05 ・ Repair Support

Contact us on WhatsApp or by phone if there is a problem; we reply within one working day and arrange an on-site visit.

FAQ ‧ Frequently Asked Questions

Frequently asked questions

What are the installation requirements?

Our own technician comes to connect it, usually completing installation the same day so you can start using it; before installation we can look at the site layout and water supply points.

As a general rule, the customer must provide the following:
a. A water supply and power socket beside the dispenser (within 1 metre of the installation point), with a shut-off valve fitted at the end of the outlet pipe
b. A pressure-reducing valve (if water pressure exceeds 30psi)
c. Ventilation where a hot water boiler is installed
d. An outlet / drainage system beside the dispenser (where applicable)

For anything beyond the above, we can carry out additional works and/or supply additional fittings if needed. We will submit a quotation for the customer's approval.

Depending on actual water usage and water quality, we visit on the recommended cycle to replace filter cartridges and check the machine, keeping output steady.

We offer scheduled maintenance plans covering on-site maintenance, filter cartridge replacement, machine checks and fault repairs; RO models also have a renewal plan.

Either works. Rental is an all-inclusive monthly fee (installation, maintenance, cartridge changes, repairs); purchase comes with a standard maintenance plan. The actual plan is quoted according to your site and usage.

The full filtration line has passed SGS testing; designated models meet NSF/ANSI 42 and 58. Bio-Link is also a certified social enterprise (HKCSS/SEE Mark, seemark.hk/see0195), operated by Bio-Link (Holdings) Limited.

We serve Hong Kong and Macau. You are welcome to reach us on WhatsApp or by phone for a free consultation on the right solution for your site.

PLANS ‧ Plans

All-inclusive monthly fee, costs stated up front

Bio-Link SWF01 Three-Temperature Drinking Fountain School Outdoor Water Dispenser
SWF01

C

R

H

Rental (monthly fee)

HK$480

For purchases, feel free to contact us for a quote.

Installation and maintenance
RELATED ‧ Related models

Same-series dispensers

Bottle-Filling Stations & Drinking Fountains
Bio-Link BFSW01 Sensor Bottle-Filling Station (Slimline) Public Water Dispenser
BFSW01

R

Filtered Bottle Filling Stations

Features

Slim wall-mounted

Filtration System

Optional standalone filtration system

Venue

School・Public Space
Bottle-Filling Stations & Drinking Fountains
SBD3200 Puder Freestanding Ice & Hot Water Dispenser (BD3200, Taiwan Premium) — Bio-Link
SBD3200

C

H

Buder Freestanding Chilled & Hot Water Dispenser

Features

Ultra-compact

Filtration System

RO or UF add-on available

Venue

School・Public Space
Bottle-Filling Stations & Drinking Fountains
Bio-Link BFS01 Touch-Free Bottle-Filling Station Public Water Dispenser
BFS01

C

R

Touchless Bottle Filling Station

Features

Touchless operation

Filtration System

RO or UF add-on available

Venue

School・Public Space
Bottle-Filling Stations & Drinking Fountains
Bio-Link BFS02 Sensor Bottle-Filling Station Public Water Dispenser
BFS02

C

R

Filtered Bottle Filling Stations

Features

Plastic bottle counter

Filtration System

RO or UF add-on available

Venue

School・Public Space
Bio-Link certification marks
SGS-tested across the full range
Bio-Link certification marks
NSF/ANSI 42 & 58

ST1523 · ST9102 · ST2011

Bio-Link certification marks
SEE Certified Social Enterprise
seemark.hk/see0195

1997

since 1997

Not sure whether the SWF01 suits you?

Free consultation, with the right solution identified straight away — start on WhatsApp, by phone or by sending photos of your site; an on-site visit can be arranged where needed.